![]() We hope that this ‘how-to article’ was a bit helpful for you. Learning the troubleshooting of any power tools is handy. But, if he/she doesn’t face the case when the weed eater head doesn’t come off, he/she needs to learn. When a user finishes the trimmer line changing a few times, he/she becomes pro. Just apply your IQ here! ConclusionĬhanging the weed eater head is a regular job for string trimmer users. In general, the straight shaft trimmer has a left hand threaded knob while the curved shaft one has a right hand threaded knob. It depends on the trimmer pattern and the brand you are using. So, you may need to reverse the clockwise and counter-clockwise movement. Note: Straight shaft and curved shaft trimmers have different rotation patterns. Always try to use the best trimmer head available on the market to avoid unpleasant situations. So, you need to place the bolt cap once after you have done changing the trimmer head. If you don’t cover the bolt that screwed up the trimmer head with the trimmer body, the bolt will loosen up now and then. ![]() Hunter Tips: Don’t forget to buy a new cap and replace the old one. Now, you should be able to remove the string trimmer head. Now, hold the CSD firmly and turn the weed wacker head clockwise.You have to insert the CSD through the whole where the outer portion of the string comes off. Take a CSD and insert it into the trimmer head.Now, avoid applying force by your hands and follow the steps below: Note: If the weed wacker head doesn’t come off despite the bolt has come off, you need to apply a simple trick. Some Important Tips and Notes on Removing Stuck Weed Wacker Head Just rotate the trimmer head clockwise if it is a curved shaft trimmer or anticlockwise if it is a straight shaft. Once, you have removed/unscrewed the bolt, you are done with removing the weed wacker head.This will ease the bolt thread and the bolt will come off. If the bolt doesn’t come off easily or becomes corroded, use a little amount of engine oil or any lubricating substance.Don’t make clockwise round, this won’t help as the trimmer head becomes screwed up when you turn it clockwise. Take the wrench to grasp the bolt, then turn around the trimmer head anticlockwise.Once you have removed the cap of the bolt, it becomes a matter of time to unscrew the bolt and remove the weed eater head.Now, hold the cap with the skinny plier and pull it by applying the required force (shouldn’t take much effort/force).After cutting the two sides of the cap, use a hacksaw or any cutting tool to cut straightly joining these two edges. Using the skinny plier hold the inner portion of the round cap and cut the cap with the help of the chisel and hammer.In that case, you need a chisel and a skinny plier. Sometimes, the cap itself may be stuck due to malfunction or inside tearing off.So, your first job will be removing the round cap. If you forget to remove this cap, you won’t be able to remove the weed wacker head.The weed eater head is locked with a bolt and that bolt is covered by a round-shaped cap (plastic gasket).To get off Your Stuck Weed Eater Head follow these Simple Steps: All you need is just to follow our guidelines. Nevertheless, you will learn how to remove the weed wacker head if it denies to come off. In this article, we will be discussing the probable reasons for the weed wacker head getting stuck. Weed wacker head doesn’t get stuck frequently but you should learn the troubleshooting if you have one. Sometimes your weed eater head won’t come off due to a silly mistake with the trimmer bolt cap! But, it is a boring and disturbing situation when you face it.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |